From Box To Bathroom - The Essentials Of Shower Unit Installation

Booking Page



We've stumbled upon this article on Simple ways to Install a Shower Cubicle on Your Own directly below on the internet and decided it made sense to share it with you on my blog.


How to Install a One-Piece Shower Unit
An effective shower setup needs cautious planning and a great deal of work. In many cases, you will need to do 3 kinds of tasks: framing walls, installing the plumbing, and also completing walls.

Prep work


First of all, you should decide on the type of shower that you wish to mount. It is necessary to identify whether the picked shower can handling specific systems and also can manage a safe degree of water through the boiler. Most shower devices nowadays are designed to be flexible to different water stress (such as saved warm water as well as chilly keys).
It is likewise crucial to consider the water pressure and the planning of the piping and drainage for the shower

Various Kinds Of Shower Units


  • Push-on Mixer: The hose and spray parts of the push-on mixer shower unit can be attached to the bathroom faucet based on your need, and the water temperature can be adjusted via the taps. Push-on mixers are cheap and extremely easy to install. However, although the hose pipe connection is simple, it is easily dislodged. Additionally, it is bothersome to change the temperature level.

  • Bath/Shower Mixer: The tube and also spray of this type of shower are combined with a bath mixer tap, and the temperature can be changed with the bathroom taps. It is a very affordable choice and also no extra plumbing is involved. However, the bath/shower mixers also struggle with bothersome temperature level control options.

  • Manual Mixer: The hose pipe as well as spray of a hand-operated mixer shower device are a part of the wall unit as well as the hot and cold water materials are linked to a solitary valve The temperature level and also pressure of the water are controlled with either one or a selection of handles (in more costly showers). Although temperature level control is a lot easier in hands-on mixer kinds, they are more expensive than the previously pointed out mixers. They likewise call for added plumbing of hot and cold supply of water pipes.

  • Thermostatic Mixer: The pipe and spray of this shower kind belong of the wall system as well as the cold and hot water supplies are connected to a single shutoff below also. It is complete with a built-in stabiliser to self-adjust the water temperature level and also to prevent it from becoming as well warm. Among the biggest advantages of a thermostatic mixer shower kind consists of hassle-free temperature control. However, it is the most costly of the various mixer alternatives.

  • Power Shower: A power shower is a single unit including an effective electric pump that is capable of changing both the water pressure as well as temperature level. This sort of shower can be fitted if there is water from a cold water tank and a hot water cylinder. A power shower makes the adjustment of both pressure as well as temperature level simple. On the other hand, it disagrees for water warmed straight by the shower or where the water is provided by a mix central heating boiler under keys stress.

  • Electric Shower: An electrical shower is plumbed into a mains cold water supply as well as it heats the water electrically. It is essential to note that for this shower type to be installed, the mains pressure needs to be at least 0.7 kg/sq cm (10lb/sq in). The unit permits the temperature level and also stress to be readjusted via a knob. Models with temperature stabilisers are better as they stay untouched by other taps somewhere else in use within the household. A major disadvantage of electric showers is that the control knob only enables the choice of heats at much less stress, or reduced temperature levels at a higher stress. This is troublesome in the winter when the spray is commonly weak and also the keys water is cooler. Nonetheless, this issue is dealt with in some models which are available with a winter/summer setting.


  • Technique


    Depending upon the sort of shower you desire to mount, the shower head must either be fitted in order to avoid its contact with the water in the bath below or the base tray, or it has to have a check shutoff.
    Prior to beginning, it is a good idea to mark the positions of the shower head and also control, and also to prepare the pipe-work included. Furthermore, the drainage system to remove the drainage will certainly require to be prepared. Both positions of the cable course and also the shower switch will also require to be considered if an instantaneous or electrical shower device is being set up.
    Utilize the direction overview offered with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is very important to remove the water. In order to secure the pipelines, they must be offered a water-proof covering and also fitted with isolating shutoffs. The pipes can then be buried right into the wall surface and smudged over to neaten the general appearance.
    Fit the base tray, shower head, and installations.
    Connect the major shower control to the pipes that will certainly be supplying the water (This might need a female screw string adapter).
    Reconnect the water system and examination the pipes for any kind of leakages, as some may require tightening.
    If you are setting up an electric shower, keep in mind to turn off the electricity supply prior to making any electric links. As soon as these connections have actually been made (there need to be advice within the instruction manual), the power supply can be changed back on.

    Changing Water Pressure to Fit Your Shower


    The cold water tank can be raised to a better elevation (sometimes as little as 150mm (6inches)) by fitting a strong wooden support beneath it - perhaps made up of struts and blockboards. If you choose this option, the major as well as circulation pipes will additionally need to be increased to meet the brand-new elevation of the reservoir.
    Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is picked, it needs to be linked into the power supply in order to operate.

    Piping and Drain


    It is best to make use of 15mm diameter supply pipelines, and also make the runs to the shower as brief and straight as feasible so as to preserve maximum pressure as well as reduce heat loss. Furthermore, by reducing the use of arm joints for pipe edges, you can decrease the resistance in the circulation of the water system. You can accomplish this by bending the pipelines rather.

    Most Common Errors


  • Breaching or overlooking local code restrictions.

  • Utilizing pipes that are too little.

  • Connecting copper to galvanized without utilizing a brass or dielectric suitable in between both.

  • Not utilizing tape or pipeline substance at threaded joints.

  • Uneven your fixtures when installing them.

  • Not installing an air gap filling up for components.

  • Reducing supply stub outs also brief to mount the shutoff valves onto after the ended up wall surface remains in area.

  • Not effectively straightening tubes right into fittings or stop valves. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will certainly trigger a leak.).

  • When turning the water back on in your house, always run the outdoors pipe valve or purge your bathrooms to hemorrhage dust and air from the lines. This particles can trigger problems in your sink taps and various other plumbing trim.



  • Things You Need To Know About Shower Enclosure


    Shower enclosures come in different designs, styles, functionalities and sizes. It gives the bathroom not only a nicer look but also convenience and practicality. If you are planning to renovate or improve your bathroom, considering a shower enclosure would surely be a great idea.


    Choosing the best shower enclosure


  • Give high consideration to the glass. Make sure that the glass is thick enough to not break easily. Also, you may want to consider glass that has an easy to clean film for easier maintenance.


  • Self-closing or magnetic door is recommended to ensure that water leaks are prevented outside the cubicle.


  • To achieve a seamless finish, consider an installation that is hidden and invisible.


  • Bi-fold or sliding door have high quality and durable rollers for durability and enjoy smooth glide for a long time. Plastic rollers are not recommended as most of the time, they need to be replaced often


  • Choose a design that would perfectly match your bathroom theme. There are tons of designs, colors and styles to choose from in the market, hence finding the one that would match your bathroom, is not hard.


  • Different types of Shower Enclosure


  • Quadrant enclosures: This enclosure type is curved and made to fit corners of the bathroom.


  • Pivot shower door: This on the other hand, opens into your bathroom.


  • Bi-fold shower door: This saves space as it is opened inwards.


  • Sliding shower door: This is, most of the time, large and perfect to replace the bathtub walls.


  • Steam shower cabin: If you have money to spare and would love to enjoy your shower more, steam shower cabin is perfect for you. It offers the relaxation you can get from a sauna plus the convenience of an enclosure


  • Walk-in shower: If you want a larger space when taking a bath, a walk-in shower is the perfect option for you

  • https://hindware.com/blog/things-you-need-to-know-about-shower-enclosure/


    How to Install a One-Piece Shower Unit

    We hope you enjoyed reading our post about Simple ways to Install a Shower Cubicle on Your Own. Thanks so much for taking the time to read through our article post. Kindly take the time to distribute this article if you liked it. Thanks for going through it.




    Get A Free Quote


    Leave a Reply

    Your email address will not be published. Required fields are marked *